Performance of alkali-activated slag individually incorporated with two nanozinc sources.

The role of nanozinc source (nanohydrozincite: nHZ; nanozinc oxide: nZO) on the performance of alkali-activated slag (AAS) was explored for the first time in the present work. The results showed that nHZ with different contents (0.5, 1.0, and 1.5 wt%) retards the early hydration rate of AAS, whereas nZO showed the lowest retardation effect. Zn(OH)2 is the main retarder inside AAS-nZO and AAS-nHZ, which consumes the dissolved Ca2+ (responsible for the early hardening of AAS) from slag to yield calcium zincate hydrate (CZH). The high retardation rate of nHZ is originated from its high affinity to consume much Ca2+ through the formation of additional pirssonite (Na2CO3.CaCO3.2H2O) double salt. Although adding nHZ induced the drying shrinkage of AAS, it improved the later compressive strengths (28 to 365 days), especially at low nHZ content (0.5 wt%), via the formation of CASH with lower Ca/Si ratio and higher binding capacity compared to that formed inside AAS and AAS-nZO. A further research is needed to reduce the drying shrinkage and to accelerate the early strength of AAS containing nHZ.

Correction: The role of perceptions and knowledge of leprosy in the elimination of leprosy: A baseline study in Fatehpur district, northern India.

[This corrects the article DOI: 10.1371/journal.pntd.0007302.].

Reuse of lead glass sludge in the fabrication of thermally insulating foamed glass with outstanding properties and high Pb-stabilization.

This study represents the sustainable/safe consumption of lead glass sludge (LGS) in the fabrication of thermally insulating foamed glass via sintering (750-950º C) and chlorination processes. The impact of selected additives including calcium chloride (CaCl2) and sodium hydroxide (NaOH) on the foaming efficiency and Pb-stabilization has been deeply investigated. LGS is mainly lead silicate material with considerable content of calcium carbonate, which acts as foaming agent during sintering process. The newly developed foamed-materials exhibited thermal conductivity of 0.054-0.136 W/m.K, density of 0.23-1.10 g/cm3, porosity of 63.3-92.6%, and compressive strength of 0.10-2.69 MPa. X-ray diffraction proved that the immobilization mechanism was attributed to the transformation of free Pb within LGS into insoluble ganomalite Pb9Ca5MnSi9O33 phase. Adding NaOH enhanced the foaming process accompanied by a significant reduction in Pb-leaching. Incorporating CaCl2 has resulted in a retardation in Pb-leaching, which associated with Pb-stabilization and Pb-vaporization. In an attempt to reduce CO2-emission, the potential use of alkali-rich-wastewater (AW) as eco-friendly alkali source in lieu of NaOH was studied. Regardless of the variation in Pb-concentrations in leachates, all samples recorded Pb-concentrations lower than the safe limit (≤ 5 mg/l), achieving Pb-immobilization of 95.98-99.87%. The significantly reduced thermal conductivity and enhanced Pb-immobilization efficiency along with the reasonable compressive strength summarize the major innovation presented in this study.

The role of perceptions and knowledge of leprosy in the elimination of leprosy: A baseline study in Fatehpur district, northern India.

BACKGROUND: With the introduction of new interventions to prevent leprosy, such as post-exposure prophylaxis (PEP) given to contacts of leprosy patients, it is necessary to update our understanding of knowledge and perception of leprosy among the populations where these interventions will be introduced, in order to tailor communication optimally to the current situation. This study is a baseline study of the PEP++ project and aimed to assess the knowledge, attitudes and practices regarding leprosy in Fatehpur, India. METHODOLOGY: The study used a community-based cross-sectional design with a mixed-methods approach. We assessed knowledge, attitudes, and practices with the KAP measure, and stigma with the Explanatory Model Interview Catalogue community stigma scale (EMIC-CSS) and the Social Distance Scale (SDS). In addition, semi-structured interviews and focus group discussions were conducted with all participant groups. The quantitative data were analysed using stepwise multivariate regression. The qualitative data were analysed using open, inductive coding and content analysis. FINDINGS: A total of 446 participants were included in the study: 100 persons affected by leprosy, 111 close contacts, 185 community members and 50 health care workers. In addition, 24 in-depth interviews were conducted and 35 people were included in focus group discussions. 12.5% of the participants had adequate knowledge of leprosy, while 22% had poor knowledge. Knowledge on cause (answered correctly by 10% of the participants), mode of transmission (5%) and symptoms of leprosy (16%) was especially poor. The mean EMIC-CSS score was 15.3 (95%CI 14.6-16.0) and mean SDS score 7.2 (95%CI 6.6-7.8). Better knowledge of leprosy was associated with lower levels of social distance towards persons affected by leprosy. CONCLUSION: This study revealed poor knowledge regarding leprosy and high levels of stigma and fear and desire to keep social distance towards persons affected by leprosy. Community education that takes cultural beliefs, knowledge gaps and fears into consideration could improve knowledge, reduce misconceptions and positively influence the perception of leprosy.